QSC GXD8 Processing Amplifier
QSC GXD8 Processing Amplifier
Good working condition, pulled out of working install.
*** 2 available. Price is per amp NOT the pair. ***
Only 1 year old.
The GXD Series GXD8 power amplifier is ideal for portable sound reinforcement applications and installations with demanding DSP requirements and flexibility at a cost-effective price. The high-performance GXD8 provides enormous Class D power in a lightweight and efficient package. The universal switchmode power supply helps reduce the weight, increase efficiency, and ensures rock-solid continued operation even with poor power conditions. The addition of on-board DSP processing with an easy-to-use interface offers powerful tools like Crossover and EQ filters, Delay, and Power Limiting that allow the user to configure the amplifier and maximize the performance of their loudspeakers. The GXD8 is engineered to meet any demanding application and provide excellent power and legendary QSC reliability, in an efficient, lightweight, and flexible package.
Features
800W/channel @ 8 ohms, 1200W/channel @ 4 ohms, 4500W total peak power
Power levels matched to the most popular speakers & optimized for maximum headroom
Class D output stage with USP for high performance/efficiency
Extensive and powerful DSP including high- and low-pass filters, 4-band parametric EQ, limiting & delay
Precision rotary encorders for gain and DSP control
Specifications
Stereo Mode - Watts Per Channel:
8 Ohm Peak, Both Channels Driven: 1500 Watts
4 Ohm Peak, Both Channels Driven: 2250 Watts
8 Ohm Continuous, Both Channels Driven: 800 Watts
4 Ohm Continuous, Both Channels Driven: 1200 Watts
Distortion (typical, 1 kHz at full rated power): < 1% THD
Signal-to-Noise Ratio (A-weighted, 20 Hz - 20 kHz): 100 dB
Input Sensitivity: 1.2 Vrms, 3.9 Vrms
Voltage Gain (8 Ohms): 33.5 dB
Output Circuitry: Class D
Power Requirements - 1/8 Power at 4Ohms:
100 VAC: 6.2 Amps
120 VAC: 5.6 Amps
230 VAC: 3.2 Amps
Frequency Response: 20 Hz - 20 kHz, +0.7 dB,-0.8 dB
Dynamic Headroom (4 Ohms): 2.73 dB
Damping Factor: 100
Input Impedance: 20 kOhms (balanced), 10 kOhms (unbalanced)
Maximum Input Level: +23.5 dBu
Input Connectors (each channel): 3-pin XLRF / 1/4" TRS, balanced
Output Connectors (each channel): NL4 (Channel1 - 1+/-, Channel 2 - 2+/-), binding posts
Amplifier and Load Protection:
Short circuit
Open circuit
Thermal
RF protection
Load protected against DC faults
Front Panel Controls and Indicators:
2x Rotary Encoders
3x Operational Buttons (HOME, ENTER, EXIT)
2x Green Signal LEDs, indicates signal presence
2x Red A/D Clip LEDs, indicate input over-drive and/or amplifier current clipping
Blue Power LED ring, AC on
2.12" x 1.0", 256 x 128 pixel LCD panel
DSP Functions:
High Pass Filter, 4th order LR, adjustable Frequency 20 Hz to 4 kHz
Low Pass Filter, 4th order LR, adjustable Frequency 60 Hz to 4 kHz
4-band PEQ, with variable Frequency, Gain, and Bandwidth
Peak Limiter, with Power, Agressiveness, and Impedance selection
Delay 50 msec max.
Dimensions (H x W x D): 3.5" (2U) x 19" x 10.2" (89 x 483 x 259 mm)
Weight: 13.2 lbs. (6.0 kg)
Agency Approvals: UL, CE, RoHS/WEEE Compliant
